Rigid pavements have sufficient flexural strength to transmit the wheel load stresses to a wider area below.
Rigid pavements have sufficient flexural strength to transmit the wheel load stresses to a wider area below. A typical cross section of the rigid pavement is shown in Figure. Compared to flexible pavement, rigid pavements are placed either directly on the prepared sub-grade or on a single layer of granular or stabilized material. Since there is only one layer of material between the concrete and the sub-grade, this layer can be called as base or sub-base course.
In rigid pavement, load is distributed by the slab action, and the pavement behaves like an elastic plate resting on a viscous medium .Rigid pavements are constructed by Portland cement concrete (PCC) and should be analyzed by plate theory instead of layer theory, assuming an elastic plate resting on viscous foundation. Plate theory is a simplified version of layer theory that assumes the concrete slab as a medium thick plate which is plane before loading and to remain plane after loading. Bending of the slab due to wheel load and temperature variation and the resulting tensile and flexural stress.
Types of Rigid Pavements
Rigid pavements can be classified into four types:
Jointed plain concrete pavement (JPCP),
Jointed reinforced concrete pavement (JRCP),
Continuous reinforced concrete pavement (CRCP), and
Pre-stressed concrete pavement (PCP).
Jointed Plain Concrete Pavement: are plain cement concrete pavements constructed with closely spaced contraction joints. Dowel bars or aggregate interlocks are normally used for load transfer across joints. They normally has a joint spacing of 5 to 10m.
Jointed Reinforced Concrete Pavement: Although reinforcements do not improve the structural capacity significantly, they can drastically increase the joint spacing to 10 to 30m. Dowel bars are required for load transfer. Reinforcements help to keep the slab together even after cracks.
Continuous Reinforced Concrete Pavement: Complete elimination of joints are achieved by reinforce-ment.