Home | ENGINEERING | Mechanical comparator

Mechanical - Metrology and Measurements - Linear and Angular Measurements

Mechanical comparator

   Posted On :  23.09.2016 01:45 pm
Mechanical comparator

Mechanical comparator employs mechanical means for magnifying small deviations.

MECHANICAL COMPARATORS

 

 

Mechanical comparator employs mechanical means for magnifying small deviations. The method of magnifying small movement of the indicator in all mechanical comparators are effected by means of levers, gear trains or a combination of these elements. Mechanical comparators are available having magnifications from 300 to 5000 to 1. These are mostly used for inspection of small parts machined to close limits.

 

 

1.  Dial indicator

 

A dial indicator or dial gauge is used as a mechanical comparator. The essential parts of the instrument are like a small clock with a plunger projecting at the bottom as shown in fig. Very slight upward movement on the plunger moves it upward and the movement is indicated by the dial pointer. The dial is graduated into 100 divisions. A full revolution of the pointer about this scale corresponds to 1mm travel of the plunger. Thus, a turn of the pointer b one scale division represents a plunger travel of 0.01mm.

Experimental setup

 

The whole setup consists of worktable, dial indicator and vertical post. The dial indicator is fitted to vertical post by on adjusting screw as shown in fig. The vertical post is fitted on the work table; the top surface of the worktable is finely finished. The dial gauge can be adjusted vertically and locked in position by a screw.


 

Procedure

 

Let us assume that the required height of the component is 32.5mm. Initially this height is built up with slip gauges. The slip gauge blocks are placed under the stem of the dial gauge. The pointer in the dial gauge is adjusted to zero. The slip gauges are removed.

 

Now the component to be checked is introduced under the stem of the dial gauge. If there is any deviation in the height of the component, it will be indicated by the pointer.

 

 

Mechanism

 

The stem has rack teeth. A set of gears engage with the rack. The pointer is connected to a small pinion. The small pinion is independently hinged. I.e. it is not connected to the stern. The vertical movement of the stem is transmitted to the pointer through a set of gears. A spring gives a constant downward pressure to the stem.

 

2.  Read type mechanical comparator

 

 

 

In this type of comparator, the linear movement of the plunger is specified by means of read mechanism. The mechanism of this type is illustrated in fig. A spring-loaded pointer is pivoted. Initially, the comparator is set with the help of a known dimension eg. Set of slip gauges as shown in fig. Then the indicator reading is adjusted to zero. When the part to be measured is kept under the pointer, then the comparator displays the deviation of this dimension either in ± or— side of the set dimension.


 

 

Advantages

 

 

1) It is usually robust, compact and easy to handle.

 

2) There is no external supply such as electricity, air required.

 

3) It has very simple mechanism and is cheaper when compared to other types.

 

4) It is suitable for ordinary workshop and also easily portable.

 

 

Disadvantages

 

 

1)                Accuracy of the comparator mainly depends on the accuracy of the rack and pinion arrangement. Any slackness will reduce accuracy.

 

2) It has more moving parts and hence friction is more and accuracy is less.

 

3)                The range of the instrument is limited since pointer is moving over a fixed scale.

 


Tags : Mechanical - Metrology and Measurements - Linear and Angular Measurements
Last 30 days 108 views
Related words :

What is Mechanical comparator Define Mechanical comparator Definition of Mechanical comparator where how meaning of Mechanical comparator lecturing notes for Mechanical comparator lecture notes question and answer for Mechanical comparator answer Mechanical comparator study material Mechanical comparator assignment Mechanical comparator reference description of Mechanical comparator explanation of Mechanical comparator brief detail of Mechanical comparator easy explanation solution Mechanical comparator wiki Mechanical comparator wikipedia how why is who were when is when did where did Mechanical comparator list of Mechanical comparator school assignment college assignment Mechanical comparator college notes school notes kids with diagram or figure or image difference between Mechanical comparator www.readorrefer.in - Read Or Refer

​TOP MENU

OTHER SUGEST TOPIC